Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Murrieta, CA | Chestnut Chimney Sweep
DuraFlex chimney cleaning in Murrieta usually means something different than most homeowners expect: we’re servicing a short factory-built metal flue tucked inside a stucco chase on a tile roof, not a brick masonry chimney. Chestnut Chimney Sweep provides independent DuraFlex cleaning, inspection, and component replacement across Murrieta’s 92562, 92563, and 92564 ZIP codes. The thing that sets our DuraFlex work apart here is that we arrive with the right tool for the actual flue: a flexible B-vent brush and camera setup, not masonry gear that would be wrong for 90% of Murrieta’s DuraFlex systems. Call (855) 360-4975 for a free estimate.
Why Murrieta Residents Choose Us for DuraFlex Service
Roland Cifuentes, our owner, has spent the better part of two decades working chimneys across the Inland Empire, and he’s pulled, inspected, and re-capped hundreds of DuraFlex factory-built flue systems in Murrieta’s tract housing. That hands-on time with the brand’s B-vent and direct-vent quirks means we’re not learning on your roof. We know which DuraFlex cap assemblies tend to loosen on back-slope chases, which flue collar gaskets dry out after an idle Murrieta summer, and which sections of stainless flex liner show the earliest wear in this inland climate.
We’re an independent shop, plain and simple. No manufacturer authorization, no warranty tie-in. That independence matters because our recommendation is based on what your flue actually needs, not what a brand program tells us to sell. We stock OEM DuraFlex flue sections, caps, and storm collars for direct matches, and we use aftermarket gaskets and screens only where they meet the same dimensional spec. When a component-level fix is the honest answer, that’s what we recommend. When a section is cracked or warped, we replace that section rather than patch it, but we won’t push a full reline that your system doesn’t need.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Murrieta
- Cracked or warped direct-vent flue collars after idle summers. Murrieta’s hot, dry inland climate regularly pushes past 100°F, and fireplaces sit unused from roughly April through October. The thermal shock of that first winter burn can crack a 1990s-2000s DuraFlex DV flue collar that’s been baking all summer. We check collar condition during every cleaning and replace the section if it’s compromised.
- Soot and dust loading inside B-vent flue sections. Gas fireplaces that sit through months of Murrieta heat collect fine dust and light soot inside the B-vent sections. When the first cold snap arrives, homeowners report draft complaints or a faint smell. We clear those short flue runs with the right brush and verify draft before we leave.
- Bird or rodent debris in short DuraFlex chase flues. Murrieta’s tile-roof tract homes have short flue runs, and the chase tops make an inviting spot for nesting. We regularly find cap screens packed with nesting material that blocks flow entirely. On a recent call in the 92563 ZIP, a homeowner in a late-1990s KB home off the back slope of a tile roof reported smoke spilling into the room on first burn. The cap screen was packed with bird nesting material and the flue collar gasket had dried out from months of idle summer heat. We cleared the flue, replaced the cap with an OEM DuraFlex storm collar and screen, and verified draft with a Level 2 camera run before calling it done.
- Loose or corroded DuraFlex cap and storm collar assemblies. Santa Ana wind events work the fasteners on back-slope chase caps year after year. We see caps that have shifted, screens that have torn, and storm collars that have pulled away from the roofline. All of these are component-level fixes we handle on the spot.
- Draft failure from misdiagnosed direct-vent systems. What looks like a masonry chimney from the street is often a direct-vent or B-vent metal flue in a stucco chase. Homeowners call us thinking they need a traditional sweep, and what they actually need is a gas fireplace service with a camera inspection to find why the draft isn’t pulling. We bring the camera and know what we’re looking at.
DuraFlex Service in Murrieta: What Local Conditions Mean for Your Equipment
Here’s the thing most Murrieta homeowners don’t realize until a tech is on the roof: your “chimney” probably isn’t a chimney in the traditional sense at all. Murrieta’s housing stock is dominated by 1980s-through-2000s suburban tract homes built by Ryland, KB, and Woodside. Those homes are stucco-clad and tile-roofed, and the fireplace is almost always a factory-built metal firebox with a short DuraFlex B-vent or direct-vent flue running through a stucco chase on the back slope of the roof. What reads as masonry from the curb is often just a framed chase with a DuraFlex flue inside it. That changes the service completely. It means we’re not sweeping creosote-heavy masonry like you’d find in an older East Coast home or a mountain-town cabin. We’re removing light soot and debris, checking the cap screen and storm collar, and running a camera to verify flue integrity on a factory-built system. It also means the brush, camera, and replacement parts we bring are sized for metal flue sections, not clay tile liners. A homeowner with a semi-custom masonry chimney near the historic downtown core has a different system entirely, and we’d service that with different tools. Knowing which one you have before we arrive saves everyone a trip.
DuraFlex Models & Products We Service in Murrieta
We service the full spread of DuraFlex product lines found in Murrieta homes: DuraFlex Direct-Vent (DV) coaxial flue kits, DuraFlex B-Vent (BV) gas fireplace flue systems, DuraFlex Factory-Built Wood Fireplace chimney sections, and DuraFlex Stainless Flexible Reline kits for the occasional masonry conversion. Our approach to parts is simple: OEM DuraFlex flue sections, caps, and storm collars for direct matches, and quality aftermarket gaskets and screens only when they match the dimensional spec exactly. We keep common DuraFlex repair components stocked so we can usually handle a cap replacement or storm collar fix on the same visit. For less common DuraFlex model lines, we source parts quickly through our established supplier network. We carry DuraFlex, along with Copperfield, Gelco, and Olympia Chimney products, because the parts matter as much as the labor. For DuraFlex sales & service, we’re the independent shop that specifies by name.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Murrieta
DuraFlex chimney cleaning in Murrieta typically runs between $180 and $340 for a standard inspection and cleaning of a factory-built gas or wood fireplace flue. What drives the final number is straightforward: whether it’s a B-vent gas fireplace or a direct-vent wood unit, how much debris has accumulated, whether the cap or storm collar needs replacement, and whether a Level 1 inspection is sufficient or we need to go to a Level 2 camera run. A full DuraFlex reline is a bigger job, usually $1,500 to $5,000 depending on flue length and access, but we’ll only recommend that when we can show you the camera footage that proves it’s necessary. You’ll see the evidence on the screen before you spend a dollar on liner work. Estimates are free, and everything we quote is a flat price before we book. Call (855) 360-4975 for an exact quote on your Murrieta system.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Murrieta
Yes, and that’s exactly what most of our Murrieta calls turn out to be. We clean and inspect factory-built DuraFlex B-vent and direct-vent flues as a matter of routine, and we bring the flexible brush and camera setup built for that job. The service is a proper DuraFlex chimney cleaning, just matched to the metal flue you actually have. Call (855) 360-4975 to book.
Months of idle heat dry out the flue collar gaskets and let fine dust and light soot settle inside the B-vent sections, so the first burn pushes the smell back into the room instead of up the flue. We clear the flue, check the gasket condition, and verify draft before we leave. If it keeps happening, we’ll camera the flue to find the real restriction. Call (855) 360-4975 and we’ll sort it out.
Yes. A direct-vent system is a coaxial flue, and the cleaning approach is different from a wood-burning flue. We’re removing dust and light debris, inspecting the inner and outer flue sections, checking the cap and storm collar, and verifying the draft path with a camera. It’s a gas fireplace service more than a traditional sweep, and we treat it that way.
Yes. Loose or corroded cap and storm collar assemblies are one of the most common DuraFlex issues we fix in Murrieta, and a cap replacement is a component-level job we handle on the same visit when we have the OEM part in the truck. We won’t push a full reline when a cap and collar fix is all your system needs. Call (855) 360-4975 and we’ll get you on the schedule.
For most routine cleanings, a Level 1 inspection is enough. But if you’ve had a Santa Ana wind event move the cap, noticed a smell or smoke on first burn, or there’s been any change in the system since the last service, we recommend a Level 2 camera inspection. It’s the only way to actually see the flue interior and catch cracked sections or failed gaskets before they become a problem. Call (855) 360-4975 and we’ll recommend the right level for your system.
Service Areas Near Murrieta
We serve the full Murrieta area, including 92562, 92563, and 92564, and we also run calls through the Inland Empire up toward Rialto, Fontana, Colton, and San Bernardino. For DuraFlex service in the San Gabriel Valley, see our DuraFlex service in Sierra Madre page, or if you’re closer to DuraFlex service in Temple City, that page covers what we offer there. And for the broader picture of everything we do, our Murrieta service area page has the full rundown.
Book Your DuraFlex Service in Murrieta Today
If your DuraFlex fireplace hasn’t been inspected since last winter, or you’ve noticed a smell, smoke, or a cap that’s shifted, call (855) 360-4975. We’ll bring the right camera, the right brush, and the right parts for a Murrieta tract-home flue. A clean flue is a quiet house, that’s really all there is to it.
Written by Roland Cifuentes, Owner at Chestnut Chimney Sweep, serving Murrieta since day one.