Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Murrieta, CA
Chimney repair in Murrieta usually means one of two things: a rusted factory-built firebox that needs a new cap or crown, or a chase cover on a tile roof that’s let water into the flue. Homes here were mostly built between the late 1980s and the mid-2000s, so we’re rarely rebuilding masonry stacks. We’re replacing metal components, sealing flashing, and restoring liners inside fireboxes that look fine from the living room. Chestnut Chimney Sweep has served Murrieta since 2012. Call (855) 360-4975 when something looks off, smells damp, or just hasn’t been checked in years.
Why Murrieta Homes Are Different
Most Murrieta chimneys aren’t chimneys in the traditional sense. In the tract homes Ryland, KB, and Woodside built through the 1990s and 2000s, what you see from the street is often a stucco chase running up the back slope of a tile roof, and inside that chase is a metal flue, not a masonry liner. The fireplace itself is typically a factory-built metal firebox with a short run to the roof. That changes what cleaning and repair actually mean here. We’re not chipping creosote off old brick. We’re checking stainless flue sections, sealing chase tops, and looking at the flashing where the chase meets the tile.
The climate adds its own pattern. Murrieta’s summers regularly push past 100°F, and a fireplace that sits unused from April through October collects dust, spider webs, and sometimes bird or rodent nests. Then the first cold snap in November or a Santa Ana wind event sends everyone to light a fire at the same time. That’s when debris in the flue becomes a smoke problem, and that’s why late-fall inspections before the first burn are the smart window to book. A flue that’s been sitting all summer is exactly the one that needs a camera look before you trust it for winter.
Styles & brands we work with
Our Main Murrieta Services
Two calls dominate our Murrieta schedule: fireplace and flue work, and dryer vent cleaning that homeowners finally book after noticing laundry takes two cycles to dry. Both are combustion-safety services, and both have their own detailed pages below.
Chimney Sweep in Murrieta
In Murrieta, a sweep usually means removing light soot and debris from a factory-built flue, not scraping creosote off masonry. We also remove bird nests, check the cap and spark arrestor, and run a camera to confirm the flue walls are intact. The hot, dry summers mean flues sit idle for months, and that’s when debris settles in. Before your first burn of the season, a sweep is the cheapest insurance you’ll buy. See the full breakdown on our Chimney Sweep in Murrieta page.
Dryer Vent Cleaning in Murrieta
We treat dryer vent cleaning as a fire-safety service, not a quick add-on. Lint builds up in the vent run behind the wall, and in two-story Murrieta homes those runs are often long and make several turns before they exit. That restricts airflow, makes your dryer work harder, and turns the vent into a fuel line for a fire. There’s a full Murrieta-specific breakdown on our Dryer Vent Cleaning in Murrieta page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Murrieta
In Murrieta, chimney repair is mostly a metal-and-sealant job, not a masonry job. The factory-built fireboxes and short flues in 1980s-to-2000s tract homes mean the common failures are rusted caps, leaking chase covers, cracked crowns, and flashing that’s pulled away from the tile. The good news is these repairs are usually faster and less invasive than rebuilding a masonry stack. The bad news is that water intrusion into a metal flue can quietly rot the firebox from the inside, which is why we always scope before recommending anything. If you want a fuller look at our repair methods and materials, our Chimney Repair hub page covers the details.
Chimney Cap Installation
Signs you need it
Water stains on the ceiling near the fireplace, a missing or rusted-through cap, or bird noise coming from the flue all point to a cap that’s failed or gone.
What it costs in Murrieta
New cap installation in Murrieta typically runs $150 to $350 depending on flue size and whether it’s a standard galvanized cap or stainless.
How we do it
We measure the flue opening, select a cap the right size from stainless or galvanized stock, and secure it to the flue so birds, rain, and embers stay out.
Chimney Cap Replacement
Signs you need it
A cap that’s rusted through, knocked loose by a branch, or missing its spark-arrestor mesh should be swapped before the next burn season.
What it costs in Murrieta
Replacement caps run $150 to $350 in Murrieta, and stainless adds lifespan if the old one failed early due to sun and dry heat.
How we do it
We remove the old cap, inspect the flue lip it mounts to, and install a properly fitted replacement that’s rated for your flue type.
Chimney Flashing Repair
Signs you need it
Leaks that show up around the chase or flue after rain, curled or lifted flashing, or gaps where the flashing meets the roof tile are the classic indicators.
What it costs in Murrieta
Flashing repair in Murrieta typically costs $200 to $500 depending on how much of the existing flashing can be saved.
How we do it
We lift the surrounding tile or shingle, inspect the existing flashing, replace or reseal the damaged sections, and close everything with a watertight sealant rated for the inland heat.
What Chimney Repair Costs in Murrieta
| Item | Typical range in Murrieta |
|---|---|
| Chimney cap installation | $150 – $350 |
| Chimney cap replacement | $150 – $350 |
| Flashing repair | $200 – $500 |
What’s the most common chimney repair in Murrieta tract homes?
Rusted or missing caps and failing chase covers. The dry heat and occasional Santa Ana gusts age metal fast, and once a cap fails, rain gets straight into the flue and firebox.
Does a crack in the crown need immediate repair?
Yes, if it’s letting water past the flue. A cracked crown on a Murrieta home usually means water working down into the chase, and that causes rust damage you won’t see until it’s advanced. Call (855) 360-4975 for a camera look and a quote.
Brands We Service in Murrieta
We stock and install professional-grade components from DuraFlex, HeatShield, and Olympia Chimney. Those names matter because the cap, liner, or flashing you get should be the same product a certified tech would put on any repair, not a hardware-store substitute. Most common parts are on the truck and done same visit. See our full brand list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Murrieta, CA
| Service | Typical range in Murrieta |
|---|---|
| Chimney sweep (factory-built flue) | $179 – $299 |
| Level 2 camera inspection | $299 – $499 |
| Cap installation | $150 – $350 |
| Cap replacement | $150 – $350 |
| Flashing repair | $200 – $500 |
| Crown repair | $350 – $700 |
| Dryer vent cleaning | $189 – $329 |
In Murrieta, longer dryer vent runs in two-story homes and tile-roof access can push labor up slightly, since we’re working with longer hoses and more careful ladder placement. You get a flat price before any work begins, so the number we quote on the phone is the number on the invoice.
Neighborhoods We Serve in Murrieta
We work throughout Murrieta, from the older semi-custom pockets near the historic downtown core to the newer tracts spreading toward the 215. The housing mix changes the work: some homes have real masonry, but most have factory-built fireboxes we know how to handle quickly.
- Mapleton
- Greer Ranch
- Copper Canyon
- Bear Creek
- Murrieta Highlands
We schedule across the 92562, 92563, and 92564 ZIP codes, and in most cases we can reach your home within a week.
Service Area – Cities Near Murrieta
Our Murrieta crews also cover the neighboring communities in and around the Temecula Valley. If you’re in Murrieta Hot Springs, CA, we handle the older fireplace setups there. We also cover Wildomar, CA, Sedco Hills, CA, and Lakeland Village, CA for full chimney and dryer vent service.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Murrieta
Most appointments are scheduled within a week, and for urgent water leaks before a rain event we do our best to work with your schedule. Call (855) 360-4975 and we’ll give you a real window over the phone.
In most Murrieta HOAs, repairs like caps and flashing that don’t change the roofline or exterior appearance don’t require approval. If your community requires written sign-off for roof access, we’re used to providing the documentation.
Yes. We work throughout 92562, 92563, and 92564, and we also cover nearby communities in the Temecula Valley. If you’re not sure you’re in our range, call (855) 360-4975 and we’ll confirm on the spot.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murrieta Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Paige Parker"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Andres Morales"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Allen Nguyen