Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Wrightwood, CA
Chimney repair in Wrightwood starts with understanding what 6,000 feet of elevation does to a masonry chimney. The freeze-thaw cycles, heavy snow load, and intense UV at this altitude crack crowns, spall brick, and quietly destroy clay-tile liners faster than anything in the valleys below. Chestnut Chimney Sweep has served Wrightwood since 2012, and the repair calls we take here follow a pattern: weekend cabins unattended for months, a first cold weekend, and a fireplace that smokes or a cap that’s iced over. If you’re seeing water stains near your fireplace or hearing something rustle above the damper, call (855) 360-4975. We specify the right liner, cap, or repair product for your system, by name.
Why Wrightwood Homes Are Different
Wrightwood’s housing stock is dominated by older mountain cabins and mid-century vacation homes, many built with masonry fireplaces and clay-tile liners that have absorbed decades of hard freezes. When water gets into a hairline crack and the temperature drops below 20 degrees, that water expands and turns a small fissure into a structural problem. We see crowns that have lost their overhang, flashings that have pulled away from rooflines under snow load, and dampers rusted open because a cap failed quietly while the cabin sat empty from April to November.
The seasonal burn pattern here is compressed. Unlike the low desert where fireplaces light occasionally all winter, Wrightwood burning is concentrated into a few intense months when every cabin on the ridge is lit at once. That means chimneys often haven’t been inspected since the previous spring, and the first fire of the season is when problems surface. After the first big snow, our calls spike for “smoky fireplace” that turn out to be a snow-blocked or ice-damaged cap. Because so many Wrightwood homes are weekenders, the technician often arrives to a cold chimney with no one having burned in it since last spring. That cold start matters because creosote that sat all summer has had time to harden into a glaze that a standard brush won’t move, and critters have had months to move in.
Styles & brands we work with





Our Main Wrightwood Services
Most Wrightwood homeowners call us for one of two things: a chimney that needs sweeping before burn season, or a dryer vent that’s making the machine run long and hot. Here’s what each job looks like up here.
Chimney Sweep in Wrightwood
A chimney sweep in Wrightwood is not the same job as a sweep in Rialto. At this elevation, we’re clearing more than creosote. We regularly pull owl nests, squirrel caches, and pine debris from flues that have sat open or under a damaged cap for months. The sweep itself involves a full flue brushing, a smoke chamber cleanout, and an inspection of the liner, cap, and crown while we’re in there. Because Wrightwood’s burn season is short and intense, we recommend scheduling before the first hard freeze, not after. When you book, we arrive with the full kit and give you a straight report on what we found. Details on what’s included and what it costs are on the Chimney Sweep in Wrightwood page.
Dryer Vent Cleaning in Wrightwood
Dryer vent cleaning up here matters because mountain homes run dryers hard in winter, often with long vent runs through cold crawlspaces and exterior walls. Lint that would stay loose in a warm, short vent accumulates faster when the pipe runs through a freezing space and the air can’t carry moisture out efficiently. A clogged vent makes the dryer run longer, and a longer run in a wooden cabin is exactly what you don’t want. We clean the full run from the dryer to the exterior termination, check the termination flap, and use Famco-grade venting knowledge to flag any configuration that’s working against you. The full scope is on the Dryer Vent Cleaning in Wrightwood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Wrightwood

Chimney repair in Wrightwood is driven by water and altitude. The clay-tile liners in these mid-century cabins have been through hundreds of freeze-thaw cycles, and the exterior masonry takes direct hits from heavy snow and intense UV season after season. When a crown cracks or a flashing pulls loose, water gets behind the brick and the damage accelerates quietly through every freeze. Our repair work here is about finding that damage before it becomes a tear-out. We carry HeatShield, Gelco, Olympia Chimney, and Famco products because the parts matter as much as the labor, and we recommend what the system actually needs, not what’s easiest to sell. For the full scope of what we repair and restore, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You may need a new cap if you see water in the firebox, hear animals above the damper, or notice the existing cap is rusted through, missing its screen, or gone entirely.
What it costs in Wrightwood
Chimney cap installation in Wrightwood typically runs $230 to $480, depending on the cap size, material, and whether we’re sealing a crown at the same time.
How we do it
We measure the flue opening, set the correct cap for your liner type, secure it so mountain winds can’t lift it, and typically tap-con into the crown or clamp to the liner, whichever the system calls for.
Chimney Flashing Repair
Signs you need it
Look for water staining on the ceiling near the chimney, damp drywall around the chase, or visible gaps where the flashing meets the roofline.
What it costs in Wrightwood
Chimney flashing repair in Wrightwood typically costs $490 to $1,080, with the range driven by how much of the old flashing has to come out and whether the roofline is steep.
How we do it
We cut back or remove the failed flashing, install new step and counter flashing, and seal the transition with a roofing-grade sealant that can handle Wrightwood’s snow load and UV.
What Chimney Repair Costs in Wrightwood
| Item | Typical range in Wrightwood |
|---|---|
| Chimney cap installation | $230 – $480 |
| Chimney flashing repair | $490 – $1,080 |
| Crown repair (sealant or resurfacing) | $300 – $750 |
These ranges reflect typical Wrightwood conditions: older masonry, high-elevation access, and the reality that weekenders often need everything done in one trip. We give you a flat price before work begins, and we don’t add line items without showing you why, on camera, first.
Do I need my chimney inspected before I light the first fire?
Yes, especially in Wrightwood. A chimney that has sat for six months may have a bird nest, a squirrel cache, snow-damaged flashing, or hardened creosote that needs a different brush than last season’s. An inspection before the first burn catches the problem before smoke pushes it into the house.
How much does a chimney crown repair cost in Wrightwood?
Crown repair in Wrightwood typically runs $300 to $750 depending on how much of the crown surface has lost its overhang or cracked through. We use a waterproof sealant or resurfacing product from our stock of professional-grade materials, and we’ll show you the damage before we quote a fix.
Brands We Service in Wrightwood
We stock and install HeatShield, Gelco, Olympia Chimney, and Famco components, which means we’re not guessing with hardware-store substitutes this far from a supply house. Parts that need replacing are spec’d from our own inventory or sourced quickly, so a Wrightwood repair doesn’t stretch across two trips. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Wrightwood, CA
| Service | Typical range in Wrightwood |
|---|---|
| Chimney sweep | $190 – $320 |
| Chimney cap installation | $230 – $480 |
| Chimney flashing repair | $490 – $1,080 |
| Crown repair | $300 – $750 |
| Chimney liner installation | $2,600 – $6,300 |
| HeatShield liner restoration | $1,200 – $3,500 |
| Dryer vent cleaning | $130 – $240 |
| Chase cover replacement | $380 – $850 |
What pushes a Wrightwood chimney repair higher is access. Steep rooflines, snow on the ground, and chimneys that haven’t been touched in years all add labor. That’s why we quote a flat price after we see the system, not over the phone, and why we don’t recommend work without camera evidence you can look at yourself.
Neighborhoods We Serve in Wrightwood
We cover the full 92397 ZIP and the surrounding mountain roads. Most of our Wrightwood jobs are in the cabin clusters off Highway 2, along the ridges and canyons where winter access is a real factor when there’s snow on the ground. We schedule Wrightwood work year-round, but during burn season we group calls along the mountain corridor to keep response times short.
- Downtown Wrightwood village
- Mountain High area
- Lone Pine Canyon
- Table Mountain
- Swarthout Canyon
Service Area – Cities Near Wrightwood
Chestnut Chimney Sweep works the mountain and high-desert corridor around Wrightwood, which puts us in Piñon Hills, CA and Phelan, CA on the same route we use for Wrightwood service days. We also cover the foothill communities of Oak Hills, CA and San Antonio Heights, CA, where the cabin-style housing and clay-tile liners create many of the same repair patterns we see in Wrightwood.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Wrightwood
Yes, we run Wrightwood calls year-round, though snow on the ground affects scheduling. During the winter burn season we prioritize active chimney fires and no-heat situations, and we group jobs along the Highway 2 corridor so a repair doesn’t leave a weekend cabin cold.
Most repair work we do, like cap installation, flashing repair, and crown resurfacing, does not require a permit in Wrightwood. If a full liner replacement or structural rebuild is needed, we’ll tell you what the county may require before you commit to anything.
In most cases, yes. We stock HeatShield, Gelco, Olympia Chimney, and Famco components, which means we’re not making a second trip up the mountain for a common cap or flashing part. If your system needs something unusual, we’ll confirm it’s in hand before we schedule the repair visit.
If your Wrightwood fireplace smoked on its first fire this season, or your dryer is running two cycles to finish a load, call (855) 360-4975 for a free estimate. We’ll tell you what the system needs, show you the evidence, and quote a flat price before work starts. Clean flue. Safe home. Done right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wrightwood Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Jessica Chen"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Robert Novak"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Paige Parker