Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Chimney repair in Fontana usually comes down to one thing: the dry heat and Santa Ana winds have done more damage while the fireplace sat unused than a decade of nightly fires ever could. Most homes here were built between the 1950s and 1990s, with clay-tile liners and metal dampers that crack, spall, and warp through Fontana’s 100°F summers. Chestnut Chimney Sweep has served Fontana since 2012, and we approach every job knowing the chimney has likely been baking and dormant for months, not burning. Call (855) 360-4975 for a repair estimate with camera documentation.
Why Fontana Homes Are Different
Fontana sits at the foot of the Cajon Pass, and that position shapes chimney work more than most homeowners realize. Summers routinely push past 100°F, and the dry heat cycles cause masonry to expand and contract until mortar joints crack and crowns develop hairline fractures that widen with every Santa Ana wind event. Those same winds drop grit, ash from fire season, and debris directly into idle flues and cap assemblies. The housing stock compounds it. Much of Fontana’s single-family inventory, particularly in the 92335, 92336, and 92337 ZIP codes, dates from the post-WWII Kaiser Steel boom through the 1990s subdivisions. Those homes were built with clay-tile liners and cast-iron or steel dampers, materials that degrade differently in Fontana’s arid, wind-scoured environment than they would in coastal California. A chimney here doesn’t get clogged from nightly burning. It gets compromised by sun, wind, and long stretches of disuse, then surprises its owner the first cold night of the year.
Styles & brands we work with
Our Main Fontana Services
Two services dominate the calls we get from Fontana homeowners: chimney sweeping and dryer vent cleaning. Each has its own page on this site with full pricing and local detail.
Chimney Sweep in Fontana
A sweep in Fontana is rarely a simple creosote removal. Because fireplaces here sit idle through long, hot summers, the work is really a post-summer inspection: checking for cracked crowns, dislodged caps, critter nests, and wind-blown debris that collected while the flue was dormant. We clean what needs cleaning and tell you plainly what else we find. Full details, including Fontana-specific pricing and seasonal timing, are on our Chimney Sweep in Fontana page.
Dryer Vent Cleaning in Fontana
Fontana’s dry, dusty air means dryer vents here accumulate fine particulates even when the machine works normally. A vent that vents poorly makes the dryer run hotter and longer, and lint is combustible. We treat dryer vent cleaning as a fire-safety service, built around Famco-grade venting knowledge, not a sideline add-on. See pricing and local detail on our Dryer Vent Cleaning in Fontana page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Most chimney repair calls in Fontana start the same way: the homeowner lit the first fire of the season and noticed water staining near the hearth, or heard wind rattling through the damper, or saw a pile of grit on the firebox floor. In post-war tract homes and 1970s-90s subdivisions across the 92335 and 92336 ZIP codes, the usual culprits are cracked crowns, failed flashing, and deteriorated clay-tile liners, all accelerated by Fontana’s dry heat and Santa Ana wind cycles. We inspect every repair with a camera and show you what we found before recommending any work. If you’re unsure whether a repair can wait or needs attention now, call (855) 360-4975 and we’ll help you make that call based on evidence, not pressure. Our full repair scope is described on the Chimney Repair hub page if you want to read past the Fontana-specific details below.
Chimney Cap Installation
Signs you need it
You hear wind howling through the firebox, find bird or rodent nesting material in the flue, or see rusted cap remnants on the roof after a Santa Ana blow.
What it costs in Fontana
A new chimney cap for a Fontana single-family home typically runs $250 to $650 depending on the flue size and cap material in 92335-92337.
How we do it
We measure the flue, select a cap sized for the existing crown or liner, then fasten it securely so it stays put through wind season.
Chimney Cap Replacement
Signs you need it
The old cap is missing, warped, rusted through, or no longer covers the flue properly after years of heat and wind exposure.
What it costs in Fontana
Replacing a damaged cap in Fontana generally falls between $300 and $750, with the final figure depending on whether the flue needs a custom-fitted cap.
How we do it
We remove the damaged cap, inspect the crown underneath for cracking, and install a replacement that matches the flue dimensions without closing off draft.
Chimney Liner Installation
Signs you need it
Your clay-tile liner is cracked, spalled, or missing sections, which a camera inspection will confirm beyond guesswork.
What it costs in Fontana
Liner installation in Fontana typically costs $2,200 to $4,800 depending on the chimney length and whether a full tearout is necessary before the new liner can go in.
How we do it
We size the liner to the flue, inspect the chimney path, and install a correctly rated liner suited to the appliance and burn profile in the home.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the chimney, or you see damaged, lifted, or missing flashing around the roof penetration after heavy rain.
What it costs in Fontana
Flashing repair around a chimney in Fontana usually runs $300 to $750 depending on how much of the existing flashing can be salvaged.
How we do it
We assess the existing flashing, reseal or replace what’s failed, and ensure the joint between roof and masonry sheds water properly.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, spalled, or crumbling, and you can see daylight through the cracks from below the chimney top.
What it costs in Fontana
Crown repair in Fontana typically ranges from $450 to $1,000, with the higher end applying when the existing crown needs full rebuilding rather than resurfacing.
How we do it
We clean the damaged crown, repair or reform it with an appropriate crown material, and restore the drip edge that keeps water off the masonry.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $300 – $750 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $450 – $1,000 |
Two things push prices up in Fontana specifically: access to the roof when Santa Ana wind debris or tree growth has made the chimney difficult to reach, and the extent of sun damage already present in the crown and mortar. Every repair comes with an upfront price before we start work, so you know exactly what you’re paying.
Do I really need a new liner, or can the old one be saved?
Not every deteriorated liner needs full replacement. In Fontana, where clay tiles crack from heat cycling and drought, we may be able to restore the existing liner with a HeatShield resurfacing system instead. A camera inspection tells us which path applies to your chimney. Call (855) 360-4975 and we’ll show you the footage.
How often should a Fontana chimney be repaired or inspected?
After a repair, inspect annually if you burn regularly, or before the first fire of the season if the fireplace sits unused through summer. In Fontana, the off-season is when crowns, caps, and flashing take the most weather damage. Call (855) 360-4975 to schedule an inspection before you light the first fire.
Brands We Service in Fontana
We install and service components from HeatShield, Gelco, and Olympia Chimney because the parts matter as much as the labor. We keep common cap, crown, and liner materials on hand for faster turnaround on Fontana jobs. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweep and inspection | $180 – $340 |
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $300 – $750 |
| Chimney crown repair | $450 – $1,000 |
| Chimney flashing repair | $300 – $750 |
| Chimney liner installation | $2,200 – $4,800 |
| HeatShield liner restoration | $1,800 – $3,800 |
| Chimney crown sealant | $200 – $500 |
| Chimney damper repair | $180 – $450 |
| Smoke chamber parging | $1,200 – $2,500 |
Santa Ana wind and sun-baked masonry run labor and material costs a little higher in Fontana than in coastal cities, particularly when access to the chimney is tight on older tract-home roofs. Every estimate is a flat price agreed before we begin, so there’s no surprise on the invoice.
Neighborhoods We Serve in Fontana
We cover the full Fontana area, from the older Kaiser Steel-era streets near downtown to the subdivisions spreading north and west toward the Cajon Pass corridor. We schedule by neighborhood grouping, not by ZIP code alone, so we can keep drive time down and appointments on track.
- Downtown Fontana and the historic core (92335)
- North Fontana and Sierra Lakes (92336)
- Southridge and the Jurupa Hills edge (92337)
- Northgate and the neighborhoods near the 210 corridor
- West Fontana toward the 15 freeway (92336)
Most Fontana appointments can be booked within a few business days during the fall rush, and faster outside it.
Service Area – Cities Near Fontana
Chestnut Chimney Sweep also covers the neighboring Inland Empire communities around Fontana. We regularly work in Rialto, CA, Bloomington, CA, and Glen Avon, CA, and we serve Pedley, CA for chimney repair and dryer vent work. If you’re just outside Fontana, call and ask whether your street falls in our service area.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Minor repairs like cap replacement, crown resurfacing, and flashing work typically don’t require a city permit. Larger structural rebuilds or liner tearouts may trigger Fontana’s building permit process, and we can confirm the current requirement for your specific job before any work begins.
We schedule Fontana jobs by area, and most appointments can be set within a few business days. During the fall rush before first-fire season, wait times stretch longer, so booking in late summer is the smart move for a pre-season inspection.
Yes, we cover 92335, 92336, 92337, and 92331, from the older streets near downtown to the newer subdivisions in the north. If you’re in Fontana or on its immediate edge, call (855) 360-4975 and we’ll confirm coverage for your specific street.
If you’re ready to get your Fontana chimney inspected, repaired, or cleaned before the first cold night, call Chestnut Chimney Sweep at (855) 360-4975 for a free estimate. We’ll put a camera up the flue, show you exactly what we find, and give you a flat price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Marisol Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Javier Garcia"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Sana Mehta