Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Crestline, CA | Chestnut Chimney Sweep
We’re an independent DuraFlex service provider working throughout Crestline, CA, and the short answer is this: yes, we clean, inspect, and repair DuraFlex chimney systems here, and the work we do carries extra weight because Crestline’s altitude and snow load punish liners and caps harder than any valley job we take. A DuraFlex setup that looks fine in August can show pinhole corrosion or lifted cap seams by January. Call (855) 360-4975 and we’ll get eyes on it before the next burn season.
We’re not authorized or affiliated with the manufacturer. What we are is a chimney company that has worked on enough DuraFlex liners, top plates, and caps in the San Bernardino Mountains to know exactly where this brand fails under Crestline conditions. Our team handles DuraFlex sales & service with the same parts discipline we bring to every repair: OEM components when fit and material thickness matter, quality aftermarket hardware only where it’s genuinely equivalent. If you own a Crestline cabin or full-time home with a DuraFlex liner, this page tells you what to watch for.
Why Crestline Residents Choose Us for DuraFlex Service
Roland Cifuentes, our owner, spent the better part of two decades working chimneys across the Inland Empire, including DuraFlex in San Bernardino, and he’s the first to say that a Crestline flue is a different animal from a Rialto or Fontana flue. The altitude, the freeze-thaw cycles, the pine needles, the way cabins sit cold and damp for months between uses: all of it changes how creosote forms and how fast a liner degrades. We bring that experience to every DuraFlex inspection in Crestline.
Most chimney companies can run a brush up a flue. Far fewer can tell you whether the pinholes in your stainless liner are cosmetic or structural, or whether your DuraFlex cap needs a new screen or a full replacement. We specify the right liner, cap, or repair product for your system, by name. That’s the difference. When a Crestline homeowner calls us about a DuraFlex liner that’s been in place since the mid-2000s, we already know what we’re likely to find before we get on the roof.
We also keep realistic expectations. Crestline’s seasonal-burst schedule means October and November book up fast. Call us in September and you’ll get a better slot than the person who waits until the first hard freeze.
Styles & brands we work with





Common DuraFlex Chimney Cleaning Problems We Solve in Crestline
Here’s what actually goes wrong with DuraFlex systems in Crestline, based on what we see on rooftops and in flues around 92325:
- Pinhole corrosion and open seams in stainless liners. Crestline’s damp shoulder seasons let creosote acids sit against liner walls for months. Combined with freeze-thaw condensation inside the flue, that’s how you get seams opening or pinholes forming in a DuraFlex liner that looked solid a few years back. We camera-inspect the liner during every sweep to catch this before it becomes a chimney fire risk.
- Lifted top plates and warped caps from snow load. A DuraFlex cap that handles a normal winter gets tested hard by Crestline snowpack. Ice forms, expands, and lifts top plates just enough to let water in and critters follow. We find warped cap assemblies and loose top plates on a regular basis up here, especially on cabins that sat unheated all winter.
- Crushed or kinked flexible liner sections in offset flues. Older Crestline cabins often have masonry chimneys with offsets that were never meant for a liner. A DuraFlex flexible liner gets kinked where the flue shifts, restricting draft and trapping creosote. We see this most often in wood-stove installations on steep lots where the original chimney was built for a different appliance entirely.
- Spark arrestor screens packed with pine needles and debris. Crestline’s pine-belt location means every cap on every flue eventually collects a screen full of needles, cones, and windblown duff. On DuraFlex caps, that clog kills draft and creates a very real fire hazard. It’s one of the first things we clear during a sweep, and we photograph the screen before and after so you can see the difference.
- Animal entry between burn seasons. A Crestline cabin that sits empty from April to October is an invitation for squirrels, birds, and pack rats to move into a chimney with a compromised cap. We find nests built directly against DuraFlex cap screens and inside flue tops, and removing them is half the job before any cleaning starts.
DuraFlex Service in Crestline: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic DuraFlex page. Crestline’s ZIP code 92325 sits inside a wildland-urban interface zone, and that changes what a chimney sweep actually has to deliver. More and more insurers writing policies for mountain cabins now want documentation: proof of spark-arrestor compliance, creosote level readings, liner condition reports. We photograph DuraFlex cap screens and liner condition during every single sweep in Crestline, just as we do with our Lake Arrowhead DuraFlex service, then hand you a record you can forward straight to your carrier. No extra charge, no request needed. It’s just part of how we work up here.
The joke among chimney techs is that a Crestline flue can pack two seasons of creosote in one winter because the cabin sits cold and damp the rest of the year. There’s truth in that. Homes in Crestline burn hard from November through March, then shut down for months, and the flue never really dries out. That cycle is brutal on stainless liners, especially at the seams. If you own a DuraFlex liner in Crestline and you haven’t had a camera inspection in the last two years, the time to schedule one is before snow makes your roof a liability.
We serve the whole Crestline service area, from the west side cabins near Lake Gregory to the steeper lots off Highway 138, and the access problems are real. Uneven terrain, decks built over slopes, snow-loaded roofs, second homes that are only occupied on weekends: we plan for all of it. A sweep here isn’t a drive-up-and-drop-a-ladder job. It’s a mountain access job, and we treat it that way.
DuraFlex Models & Products We Service in Crestline
We work on the full DuraFlex lineup that shows up in Crestline chimneys: Stainless Steel Chimney Liner Kits in 6-inch and 8-inch relining systems, ProFlex Flexible Chimney Liner, Insulated Chimney Liner Kits, and the Deluxe Chimney Caps and Multi-Flue Caps. That covers the vast majority of DuraFlex installs we encounter from older cabin retrofits to newer freestanding stove hookups.
Our parts policy is simple. When a liner, top plate, or cap needs replacement, we use OEM DuraFlex components whenever they’re available, because fit and material thickness actually matter in mountain conditions. For generic hardware like clamps and fasteners, a quality aftermarket part works fine. We carry common DuraFlex cap screens and top plate hardware in the truck for faster Crestline turnaround. If a liner is corroded or crushed past safe use, we’ll tell you straight and quote a reline rather than patch something that shouldn’t be patched. Emphasizing Level 2 Inspection, Cap Replacement, and Creosote Removal has always been core to how we approach DuraFlex work in this area, the same way we handle Highland DuraFlex service.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Crestline
Chimney sweeping in Crestline runs about the same as mountain communities generally, which is to say a bit higher than valley pricing because of access, travel, and the extra time snow conditions add. A standard sweep with a visual inspection usually lands in the $175 to $275 range. Adding a Level 2 camera inspection typically brings the total to $350 to $500. Cap replacement runs $150 to $400 depending on the DuraFlex model and whether we’re doing a single-flue cap or a larger multi-flue assembly. A full DuraFlex liner reline is the big-ticket item, generally $2,000 to $4,500 including the OEM kit and installation labor.
What drives cost in Crestline specifically: roof access difficulty, time of year, whether the chimney has been neglected long enough to need a heavy creosote removal pass, and whether the cap or liner needs replacement rather than cleaning. Every estimate we give is free and based on what we actually see, not a phone-script number. Call (855) 360-4975 to get a real quote for your place.
Serving Crestline, CA — Our Local Coverage Area
We’re based in the Crestline area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Crestline
Yes, and it’s not close. Valley caps fail from sun exposure and occasional rain. Crestline caps take snowpack sitting on them for weeks, ice expansion along seams, and repeated freeze-thaw cycles that pull top plates up and let water in. We replace more warped and lifted caps in one Crestline winter than we do during DuraFlex repair in Muscoy in a full valley year. If your cap is more than five years old, have it looked at before the snow starts. Call (855) 360-4975 and we’ll check it.
Every year if you burn regularly, every two years at minimum if the cabin is seasonal. Crestline’s damp, freeze-thaw environment ages stainless liners faster than dry climates, and the cost of catching a seam opening early is a fraction of what a full reline or chimney fire costs. We camera-inspect during every sweep so you’re not guessing.
We can clean around a kinked section, but we won’t pretend that fixes the problem. A crushed or kinked DuraFlex liner restricts draft, traps creosote above and below the damage, and needs correction, not just brushing. We’ll document the damage with photos, explain whether a repair or reline is the right call, and give you a straight quote either way. Call (855) 360-4975 for an inspection.
Many do now, especially for cabins in the wildland-urban interface around 92325. They want to see a functioning spark arrestor screen and reasonable creosote levels. We photograph your DuraFlex cap screen and liner condition during every sweep and hand you a documentation record you can send to your carrier. That little record has saved more than one Crestline homeowner a policy renewal headache.
September or early October, before the burn season rush and before snow makes rooftop work slow. Crestline’s seasonal-burst pattern means late October and November calls compete with everyone else’s first cold snap. Spring is fine too, and often better for repairs. Call (855) 360-4975 and we’ll find a slot that works with your cabin’s schedule.
Service Areas Near Crestline
Our trucks run all through the San Bernardino Mountains and the valley below. We handle DuraFlex work in DuraFlex service in Riverside and DuraFlex service in Pedley, plus surrounding communities like Rialto, Bloomington, Muscoy, Fontana, Colton, and San Bernardino. If you’re anywhere near Crestline or the foothill corridor, one call covers the trip.
Book Your DuraFlex Service in Crestline Today
We keep Crestline slots open through the pre-season rush, and we’ll work around your cabin’s schedule if it’s a second home. Call (855) 360-4975 now to lock in a sweep or inspection before the snow shows up. A clean flue is a quiet house, that’s really all there is to it.
Written by Roland Cifuentes, Owner at Chestnut Chimney Sweep, serving Crestline and the San Bernardino Mountains.