Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Bloomington
Dryer vent cleaning in Bloomington typically runs $129 to $189 for a standard single-family home, and we can usually get a crew to your ZIP code 92316 within a few days of your call. The marine-layer air here does something most homeowners never see coming: it corrodes galvanised vent hoods and caps years before their inland counterparts in Rialto or San Bernardino even start to pit. We work Bloomington’s older stucco and ranch homes every week, so we know exactly where those vents terminate and what fails first.
If your dryer is taking two cycles to finish a load, or the laundry room feels warmer and damper than it should, call Chestnut Chimney Sweep at (855) 360-4975 for a free estimate. We’ll tell you plainly what’s going on, and we won’t recommend a single repair you can’t see for yourself.
Why Chestnut Chimney Sweep Is Bloomington’s Preferred Dryer Vent Cleaning Company
Dryer vent work sits alongside chimney sweeping and chimney repair under one roof at Chestnut Chimney Sweep, and that changes how we approach a Bloomington home. We’re not a handyman with a brush attachment. We’re combustion-safety specialists who understand how a dryer vent, a fireplace flue, and the air moving through your house all interact. In Bloomington’s dry Santa Ana season, a lint-packed vent and a creosote-loaded chimney are the same problem wearing two different hats: fuel waiting for an ignition source.
Roland Cifuentes built our approach around naming the parts we install. When we replace a corroded hood off Valley Boulevard or Slover Avenue, you’ll hear the brand: Famco, DuraFlex, Copperfield. That specificity matters in a community with as much older housing stock as Bloomington, because a galvanised cap that fails in five years and a stainless one that runs for twenty are not the same product, and you deserve to know which one you’re paying for. Our Dryer Vent Cleaning team treats every Bloomington appointment as a chance to inspect the whole run, not just clear the lint.
We’ve pulled corroded hoods off mid-century stucco homes near the 10 and 15 freeways where exhaust had been leaking into attics for months, and the homeowner only noticed because the dryer started running hot. Bloomington’s marine layer makes that failure mode common, and we’ve learned to look for it before the damage spreads into framing or insulation.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Bloomington
Dryer Vent Cleaning
Our standard cleaning covers the full run: lint trap, the vent pipe, and the exterior hood. In Bloomington, where long hot summers leave dryers idle and Santa Ana winds drive dust through every gap, we often find vents packed with fine Inland Empire dust that acts like a slow-motion blockage. A clean run means shorter dry times and a lower fire risk, and we’ll show you the before-and-after with photos from our inspection camera.
Dryer Vent Hood and Cap Replacement with Stainless Components
This is the service Bloomington’s climate demands most often. Galvanised dryer vent hoods pit at the seams from marine-layer humidity and airborne salt, and once a seam opens, humid exhaust leaks into the wall cavity or attic instead of outside. We replace failed galvanised hoods with stainless Famco models, which hold up against the same coastal moisture that destroyed the original. If your hood is flaking rust or the flap no longer seats, the fix is usually a one-visit replacement.
Dryer Vent Run Inspection and Rerouting
Older Bloomington homes frequently have flexible foil or plastic vent runs crushed behind the dryer, kinked at a 90-degree turn, or terminated in a spot no one’s inspected since the house was built. A crushed connector creates a lint trap that Inland Empire dryness worsens, since the dust and debris settle instead of flowing through. We inspect the full run with a camera, and when a run needs reconfiguring, we use smooth-wall DuraFlex rather than hardware-store foil slinky, because the interior surface genuinely matters for airflow and lint accumulation.
Pre-Santa-Ana Vent Preparation
Bloomington homeowners don’t run dryers the same way year-round, but the wind season changes the risk profile anyway. Dry, gusty conditions pull harder on exterior terminations, and a marginal vent that performs fine in still air can struggle when a 40-mile-an-hour Santa Ana is pushing back against the hood. We recommend a fall inspection before the winds settle in, and we’ll clear any accumulated dust and verify the backdraft flap closes completely. It’s the same rhythm we use for chimney sweeps in Bloomington: prepare for the dry wind season, not the rain.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bloomington
We specify and install Famco vent hoods and connectors, HeatShield restoration materials, and Gelco and Olympia Chimney caps on the chimney side, because contractor-grade parts last longer than the anonymous aftermarket alternatives. For Bloomington specifically, our crews keep stainless Famco hoods and smooth-wall DuraFlex on the truck, because we know marine-layer corrosion is the local failure mode and waiting a week for a part means another week of humid exhaust leaking into your attic. We’d rather show up ready to finish the job than quote you a part we don’t have.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Bloomington Homes
- Corroded galvanised hoods from marine air: Bloomington’s marine layer carries moisture and salt that pit galvanised seams within a few years, far faster than inland neighbors like Rialto. The first sign is usually a rust streak below the exterior termination, or a dryer that runs hotter as the flap sticks.
- Crushed flexible connectors forming lint traps: When a dryer gets shoved back against the wall, the foil run behind it kinks and collapses. Dust and lint pile up at the kink, and each load pushes more into the trap until airflow drops enough to trip the thermal limit or start a smolder.
- Long unused vents packed with dry dust: Bloomington’s hot summers mean dryers often sit unused for months, which lets fine dust and debris settle and compact inside the run. The first heavy laundry week of fall pushes that layer into a dense plug, and we get the call when a dryer stops producing heat entirely.
- Stucco homes with hidden vent terminations: Decades-old stucco construction in Bloomington frequently buries the dryer vent termination under an eave or inside a wall cavity, which means the hood goes uninspected for years. We routinely find corroded hoods that have been quietly leaking exhaust into the attic while the homeowner had no idea.
Pricing for Dryer Vent Cleaning in Bloomington, CA
A standard dryer vent cleaning in Bloomington runs $129 to $189 for most single-family homes, depending on the run length and how easy the access is. If we’re replacing a corroded galvanised hood with a stainless Famco model during the same visit, that adds roughly $85 to $140 for the part and labor. A full reroute of a crushed or poorly configured run typically lands between $225 and $400, depending on the linear feet of DuraFlex required. Bloomington’s older ranch homes sometimes push toward the higher end when the vent terminates in awkward spots, like a low crawlspace or a roof jack. Every job gets a camera inspection and photo report before we recommend anything, and our estimates are free. Call (855) 360-4975 for a precise quote.
We Also Serve Cities Near Bloomington
Beyond our work across Bloomington, we run Dryer Vent Cleaning routes through Fontana, Rialto, Glen Avon, and Pedley. The coastal moisture and older housing stock carry across the whole corridor, so if you’re just over a city line, call us at (855) 360-4975 and we’ll get you on the schedule.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Bloomington
Bloomington sits in the path of marine-layer air that carries moisture and salt further inland than most people expect, and that salt-laden humidity attacks galvanised coatings until the seams pit through, often within five to seven years. Inland cities like Rialto and San Bernardino get less of that marine influence, so the same galvanised hood might last twice as long there. The practical upshot for Bloomington homeowners is that stainless steel hoods, which we install as standard, are the right material for this microclimate. If you see rust at the seams of your exterior dryer vent hood, call (855) 360-4975 for a replacement quote.
Yes, and in Bloomington the risk compounds because the dry Santa Ana season keeps lint at its most flammable, driest state. Lint is fine cellulose fuel, and when a crushed run traps it against the hot dryer exhaust path, you have exactly the conditions that lead to dryer fires. We treat dryer vent cleaning as a fire-safety service because that’s what it is. A no-cost quote to inspect and clear your run is one call away at (855) 360-4975.
A yearly inspection catches the failure modes that don’t announce themselves: a galvanised hood slowly corroding at the seams, a run accumulating dust during long idle stretches, a connector crushing behind the dryer every time it gets bumped. In Bloomington, where the marine layer accelerates corrosion and the dry season accelerates dust buildup, a vent can go from fine to fire-hazard in about two years. We check all of it with a camera and show you the photos. Call (855) 360-4975 to book an inspection, and we’ll include it with your cleaning.
Yes, we carry stainless Famco hoods on our trucks when we run Bloomington routes specifically so we can replace a corroded hood in the same visit as a cleaning. We swap out failed galvanised parts for stainless as standard practice in this area because the marine layer makes galvanised a known failure point. You’ll know the exact model and material going in before we make the swap. Schedule both with one call to (855) 360-4975.
The pre-Santa-Ana rhythm applies to dryer vents because the same dry, gusty conditions that push embers into chimneys also put extra strain on exterior vent terminations. A hood with a weak flap or a partial lint block becomes a bigger problem when 40-mile-an-hour winds push back against the exhaust, so we recommend a fall inspection and cleaning before the wind season locks in. It’s the same timing that keeps Bloomington chimneys safe, applied to the other combustion appliance in your home. Call (855) 360-4975 to get on the fall schedule.
Contact Chestnut Chimney Sweep: Call (855) 360-4975 for a free estimate on dryer vent cleaning in Bloomington. We’ll inspect your run with a camera, show you what we find, and quote you a price before any work starts. One call covers your chimney and your dryer vent, two of the most overlooked fire hazards in a home.
Written by Roland Cifuentes, Owner at Chestnut Chimney Sweep, serving Bloomington and the surrounding Inland Empire communities.