Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irvine, CA
Chimney repair in Irvine usually means working on factory-built metal flues and gas fireplace systems in homes built from the 1970s forward, not rebuilding century-old masonry stacks. Most of what we see in Irvine comes down to deteriorated caps, leaking flashing, or liners that have corroded from years of disuse and coastal moisture. Chestnut Chimney Sweep handles the full vertical stack, from cap to firebox, and we specify parts by brand so you know exactly what’s going into your home. Call us at (855) 360-4975 when you need a straight answer about your chimney.
Why Irvine Homes Are Different
Irvine is a city of master-planned villages: Woodbridge, Northwood, Turtle Rock, Westpark, and the newer Great Park and Orchard Hills neighborhoods. Almost all of this housing stock went up between the 1970s and the 2010s, which means the chimneys here are rarely full masonry structures. Instead, you’ll find factory-built metal fireboxes, prefabricated flue pipe, and gas log sets that were installed when the house was framed. These systems age differently than old brick chimneys. The metal components corrode, the caps loosen in Santa Ana winds, and the flue liners develop pinhole leaks that brick would simply absorb for decades before failing.
The climate shapes the work too. Irvine’s warm, dry Mediterranean weather means fireplaces get used a handful of evenings each winter at most, so heavy creosote buildup is uncommon. What we do see is a different kind of problem: long idle periods let birds, roof debris, and dust settle inside the flue. Then the first cold night arrives, someone lights a fire, and the system that sat untouched for ten months is suddenly asked to perform. Dry Santa Ana conditions only make accumulated debris more brittle and combustible. Add in the fact that most Irvine villages are HOA-governed, and you have a place where exterior changes like a new chimney cap or visible flashing often need architectural approval before any work begins. That’s not a hassle, exactly. It’s just part of how Irvine functions, and we work with it every week.
Styles & brands we work with
Our Main Irvine Services
The two calls we get most often from Irvine homeowners are chimney sweeping and dryer vent cleaning. Both are preventive services, and both are usually overlooked until something acts up.
Chimney Sweep in Irvine
An annual chimney sweep in Irvine is less about removing pounds of creosote and more about confirming the system is clear, dry, and ready for the few weeks a year you’ll actually use it. We inspect the flue with a camera, remove any nests or debris that settled during the long off-season, and check the cap, crown, and damper as part of the same visit. Because most Irvine chimneys feed gas fireplaces or prefab wood-burning boxes, the job is precise and usually finished in under two hours. Full details are on our Chimney Sweep in Irvine page.
Dryer Vent Cleaning in Irvine
Dryer vents in Irvine clog with the same lint as anywhere else, but the housing density here means many laundry rooms sit in the center of the house with long, multi-turn vent runs to the exterior. That layout traps lint faster than a short, straight run, and it’s the reason a dryer suddenly takes two cycles to finish a load. We treat dryer vent cleaning as a fire-safety job, and our work is grounded in Famco-grade venting knowledge, not a quick brush-through. See Dryer Vent Cleaning in Irvine for the full picture.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irvine
Most chimney repair calls we take in Irvine involve metal components that have corroded or shifted: a cap that’s rusted through, flashing that’s pulled away from the roofline, or a liner that’s pitting after years of sitting unused in coastal air. These are things you can often see from the ground if you know what to look for, and they’re nearly always fixable without rebuilding the whole chase. Chestnut Chimney Sweep stocks and installs professional-grade materials including HeatShield, Gelco, and Olympia Chimney products, so when we quote a repair, we can tell you exactly what we’re putting in and why. Our Chimney Repair work is covered in depth on the Chimney Repair service page.
Chimney Cap Installation
Signs you need it
The existing cap is missing, rusted through, or the mesh sides have pulled loose, leaving the flue open to birds and rain.
What it costs in Irvine
Chimney cap installation in Irvine typically runs $180 to $340 for a standard prefab flue, including the cap and the labor to secure it properly.
How we do it
We measure the flue opening, match the cap material to your system (galvanized or stainless, depending on exposure), and fasten it to the flue with the right mechanical connection, not just a friction fit.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney chase or damp drywall around the fireplace after winter rains.
What it costs in Irvine
Flashing repair in Irvine generally lands between $200 and $800, depending on how much of the roofline junction needs to be reworked to stop the leak.
How we do it
We cut back the old flashing, inspect the underlayment where the chase meets the roofline, and install new step and counter flashing sealed with a material rated for Irvine’s dry-to-wet seasonal swings.
Chimney Liner Installation
Signs you need it
A camera inspection reveals cracks, pinholes, or separated seams in the liner, or you’re noticing draft problems and a faint smoky smell even when the damper is open.
What it costs in Irvine
Liner installation in Irvine typically starts around $1,500 and can reach $3,200 or more for taller chases or systems that need an insulated liner.
How we do it
We size the liner to the flue dimensions and appliance, then run a continuous coil of stainless or aluminum liner down the chase and connect it at the top collar and appliance outlet, then confirm draft with a smoke test.
Chimney Crown Repair
Signs you need it
The concrete or mortar crown at the top of the chase has cracked, spalled, or pulled away from the flue pipe, letting water into the chase between the metal and the framing.
What it costs in Irvine
Crown repair in Irvine commonly falls between $400 and $1,200, depending on whether we’re sealing cracks or casting a new crown over the whole top of the chase.
How we do it
We clean the existing crown surface, fill or recast the damaged area with a mix that can handle heat cycling, and slope it so water runs away from the flue instead of pooling around it.
What Chimney Repair Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Chimney cap installation | $180 – $340 |
| Flashing repair | $200 – $800 |
| Crown repair | $400 – $1,200 |
| Liner installation | $1,500 – $3,200 |
Do I really need a new liner, or can it be restored?
Sometimes a liner with surface cracking or early pitting can be restored with HeatShield instead of replaced. We only recommend restoration when the liner’s structural shape is still intact, and we’ll show you the camera footage that supports the call. If a liner is still serviceable, we’ll say so.
How often should a chimney be swept in Irvine?
Once a year is the right rhythm here, even though Irvine fireplaces see light use. The point is less about creosote and more about clearing what settled during the idle months and catching small issues before they become repair jobs. Schedule it in late summer or early fall, before the first cold night.
Brands We Service in Irvine
We work with HeatShield, Gelco, Olympia Chimney, and Famco components on Irvine repair jobs, and we keep the most common cap sizes and flashing profiles on hand for quick turnarounds. Most standard parts are matched and installed within a week. See our brands for the full list of what we specify.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Chimney sweep (standard prefab or gas) | $139 – $259 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $160 – $320 |
| Chimney flashing repair | $200 – $800 |
| Chimney crown repair | $400 – $1,200 |
| Chimney liner installation | $1,500 – $3,200 |
| Dryer vent cleaning (single vent) | $75 – $180 |
| Dryer vent cleaning (multi-story or long run) | $110 – $250 |
Prices in Irvine push higher when the chase is tall, the roofline is steep, or the HOA requires specific cap styles that have to be special-ordered. Lower costs usually mean a single-story chase with easy roof access. We quote a flat price before we book, so there’s no hourly meter running while we work, and the price we give you is the price you pay.
Neighborhoods We Serve in Irvine
We work throughout Irvine, including ZIP codes 92617, 92618, 92619, and 92620. Most of our service calls in Irvine can be scheduled within a week, though spring and early fall fill up quickly as people prep for the next burning season or the first rain.
- Turtle Rock
- Woodbridge
- Northwood
- Westpark
- Orchard Hills
Service Area – Cities Near Irvine
Beyond Irvine, we regularly serve homeowners in the surrounding communities. You’ll find us in Tustin, CA and Santa Ana, CA, plus North Tustin, CA and Laguna Woods, CA. If you’re just outside Irvine, call and ask: the odds are good we cover your street.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irvine
Most Irvine appointments are scheduled within five to seven business days, with tighter windows available during the fall rush. Repair estimates can usually be turned around faster than full service visits because they’re shorter. Call (855) 360-4975 and we’ll give you the next open slot.
For interior work like cleaning or liner repair, almost never. For exterior changes like a new cap, flashing, or anything visible from the street, many Irvine HOAs want architectural approval first.
We can tell you what’s likely to need approval based on your village, and we’ll provide the spec sheet if the HOA asks for one.
Yes, and that’s one of the reasons people call us. One appointment covers the chimney sweep and the dryer vent cleaning, so you don’t need to coordinate two separate companies. We schedule them together and knock both out in a single visit, which saves you a second scheduling call and a second truck in the driveway.
Call Chestnut Chimney Sweep at (855) 360-4975 for a free estimate on any chimney or dryer vent work in Irvine. We’ll give you a straight answer and a flat price before we book anything.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Paige Parker"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Andres Morales"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Allen Nguyen